Friday, June 1, 2018

Not dead - just hibernating

Sorry for this update, hehe.
Many subscribers probably sees this thinking it's another fancy development post. ;)

I've got so much going on in my life at the moment, so there's just not any time to work on the machine (it's been almost five months since the last update! :O ). The machine isn't abandoned, so please check back from time to time, but there will probably not be any work done until August/September.

See you sooner than you think and thanks for helping me stay motivated through the years! :)

5 comments:

  1. it's now August/September :)

    ReplyDelete
    Replies
    1. I know... :'D
      But I've sat down a few hours today, at least! Haha.

      Still working on the servo routine, since the built in libraries (and software libraries) didn't work. So I've coded my own. Hopefully it will run with a physical servo as well, but need to detach the one I got in the machine to test it. Will do that soon. :)

      Delete
  2. keep going! we are supporting you in this long term project :-)

    ReplyDelete
    Replies
    1. Thanks!
      The machine is always watching, always judging... ;)

      Things are starting to level out a bit for me personally, so I'm likely to have a lot more time to put into the pinball machine soon! \m/

      Delete